With vibration dampening properties and high resistance to heavy or shock loads, you can reduce your maintenance costs considerably. If you’re seeking cylindrical roller bearing solutions, NSK’s EMM-VS series for vibrating equipment features high load-carrying capability and an innovative outer-ring-guided machined brass cage that gives higher strength and wear-resistance under vibrating conditions. Ultimately, correct bearing selection means that mining, quarrying and construction sites can maximise their uptime and productivity while simultaneously reducing maintenance costs. If you would like advice in choosing a bearing for your aggressive operating environment, we have the in-house expertise available at HAYLEY DEXIS and NSK to ensure you always receive the optimal solution.
Align Effectively To Save Energy
This issue is a real pain point for industry, where over 50% of machines and industrial equipment run out of alignment in reference to ISO standards. Misalignment occurs when coupled shafts are positioned so that their gaps or offsets are outside acceptable limits. Shafts subsequently run off-centre, in an elliptical motion, causing higher loading, heat generation and energy consumption. There are many warning signs of misalignment, including high vibration, increased temperature, loose coupling bolts and excessive lubricant leakage at bearing seals, to list but a few. If you’ve noticed that your machine suffers from any of these effects, it will almost certainly be costing you money in higher power consumption. NSK and HAYLEY DEXIS can help by offering NSK’s advanced laser alignment tools for shafts and belts. These tools ensure quick and perfect alignment every time, an outcome that not only reduces energy consumption, but also reduces wear on important machine components such as seals and couplings, minimises machine downtime and maximises productivity. The more precisely your machines are aligned, the more efficiently rotational power is transferred. Using NSK laser alignment tools, it’s possible to achieve power consumption savings of up to 17%. And that’s just for a single machine. Due to the significant energy savings available, the return on investment for laser alignment tools is very short. Energy efficiency is a critical focus point for industry, which is under pressure to play its part in the drive towards net-zero. Electric motors and the systems they drive account for more than 40% of global electricity consumption.
Energy Efficient Bearing Solutions
NSK has an extensive range of energy-efficient bearing solutions – available from HAYLEY DEXIS – that not only save money through lower machine running costs, but also reduce CO2 emissions and contribute to a more sustainable industry. For instance, NSK has a series of deep groove ball bearings that generates up to 80% less energy loss in electric motors. In comparison with conventional deep groove ball bearings, these high-efficiency bearings demonstrate 60% less friction when using a steel cage and 80% less friction when using a plastic cage. A further innovation is NSK EA7 grease, which reduces internal friction, increases energy efficiency and doubles the service interval for electric motors. Alongside optimised grease fill, this low-viscosity and friction-reduced lubricant provides the ideal solution for any manufacturer looking to reduce torque and, in turn, cut CO2 emissions.
Reduce Friction In Your Rolling Elements
Non-contact seals represent another contributor to energy-efficient bearing performance. When looking to design energy-efficient drive systems, you should always take rolling bearings into account. The inherent friction which occurs from the contact of conventional seals can compromise drive efficiency. HAYLEY DEXIS and NSK can offer solutions that ensure efficient sealing properties without increasing frictional torque or operating temperature. The automotive industry is among those that can benefit as it sets about increasing the energy efficiency of its on-vehicle drive mechanisms. Further market demand for low-friction ball bearings comes from applications such as domestic appliance production, especially washing machines, where manufacturers declaring a favourable efficiency class enjoy a distinct competitive edge in the market. Turning to another important innovation, our bearings are proving popular for improving the high-speed rotational performance of electric vehicle (EV) motors, thanks largely to the utilisation of various advanced technologies, including a plastic cage. Plastic cages are lighter than steel cages, offering reduced mechanical losses, excellent self-lubricating properties and a low co-efficient of friction, all of which contribute to energy efficiency and sustainability.